16-88 ELECTRICAL SYSTEM
Electronic Cruise Control System Switches
Shift the transmission to 1st gear.
While pushing the "S" button [A] of the right handlebar
switch housing, turn the ignition switch [B] to ON.
The meter display will enter the cancel switch diagnostic
"CHEC" [B] will appear on the display.
If a number [A] is flashed, inspect the switch that matches
the number according to the above table (see Switch In-
Close the throttle [A] to the stop.
The number 1 [A] will appear and the electronic cruise
control indicator light (LED) [B] will come ON.
While returning the throttle to the stop, the indicator light
(LED) will go OFF.
If number 1 does not appear, inspect the electronic cruise
control cancel switch (throttle) (see Switch Inspection).
If the switch is good, check the throttle cable condition
(see Cable Installation in the Fuel System (DFI) chapter).