16-76 ELECTRICAL SYSTEM
Service Code Indication Inspection
When the DFI/ETV system parts have trouble, the service
code appears (see Fuel System (DFI) chapter).
For example, disconnect the gear position switch lead
Turn the ignition switch to ON.
Check that the "Error" [A], "25" and "FI" symbol [B] appear
in the display.
Push and hold the meter unit switch [A] more than two
Check that the display changes to the ordinary indication.
If the display function does not work, replace the meter
base and/or ECU.
Connect the gear position switch lead connector.
Water Temperature Gauge Inspection
Seat (see Seat Removal in the Frame chapter)
Fuel Tank Mounting Bolts [A]
Lift up the rear end of the fuel tank, using a suitable wood
Water Temperature Sensor Connector [A]
Connect the variable rheostat [B] to the connector of the
Note that the radiator fan rotates when connecting the
resistance of 120 Ω.