Meter, Gauge
•
Check that the display changes to the unit setting mode
[A].
•
By turning the meter unit switch [A] to MODE-B position
[B] each time, check that the display changes as follows.
If the display function does not work, replace the meter
base (see Meter Unit Disassembly).
○
To return to the ordinary indication, push and hold the
meter unit switch more than two seconds.
Can Communication Item Inspection
Electronic Cruise Control Indicator Light (LED) Inspec-
tion
•
Turn the ignition switch to ON.
•
Push the electronic cruise control ON/OFF button [A].
•
Check that the electronic cruise control indicator light
(LED) [A] goes on.
•
Push the electronic cruise control ON/OFF button.
•
Check that the electronic cruise control indicator light
(LED) goes off.
If the electronic cruise control indicator light (LED) does
not function, check the right handlebar switch housing
(see Switch Inspection).
If the switch housing is good, replace the meter base
and/or ECU.
○
The electronic cruise control indicator light (LED) goes
on at the check of the electronic cruise control cancel
switches too (see Electronic Cruise Control Cancel
Switches Inspection).
ELECTRICAL SYSTEM 16-75
Comments to this Manuals
Latest comments: