Squeeze the brake lever slowly and hold it with a band
Be sure to hold the front brake when removing the
rear wheel, or the motorcycle may fall over. The
motorcycle could be damaged.
Motorcycle may fall over unexpectedly resulting in
an accident or injury. Be sure to hold the front brake
when removing the rear wheel.
Rear Wheel Rotation Sensor [A] (ABS Equipped Mod-
Bolt [B] and Brake Hose Guide [C]
Rear Caliper Mounting Bolts [D]
Rear Caliper (with the hose installed) [E]
Cotter Pin [A]
Rear Axle Nut [B]
Belt Adjuster Locknuts [D] (Both Sides)
Belt Adjuster Nuts [E] (Both Sides)
Pull out the rear axle.
Clear the drive belt [A] from the rear pulley [B].
Remove the rear wheel.
Do not lay the wheel directly on the ground with
the disc facing down. This can damage or warp the
disc. Place blocks to under the wheel so that the
disc does not touch the ground.