Balancer
Balancer Mechanism Removal
•
Remove the alternator cover (see Alternator Cover Re-
moval in the Electrical System chapter).
•
Loosen the front balancer sprocket bolt [A] and rear bal-
ancer sprocket bolt [B] while holding the alternator rotor
[C] steady with the rotor holder.
Special Tools - Grip [D]: 57001-1591
Rotor Holder [E]: 57001-1726
•
Remove the alternator rotor (see Alternator Rotor Re-
moval in the Electrical System chapter).
•
Push down the balancer chain tensioner shoe [A] to align
the hole [B] of the link plate [C] and tensioner body [D].
•
Insert the suitable pin [E] into the hole to hold the ten-
sioner in place.
•
Remove:
Balancer Chain Guide Bolts [A]
Balancer Chain Tensioner Bolts [B]
Balancer Chain Guide [C]
Balancer Chain Tensioner [D]
Front Balancer Sprocket Bolt [E] with Washer
Rear Balancer Sprocket Bolt [F] with Washer
•
Remove the following parts as a set.
Balancer Chain Sprocket [A]
Front Balancer Sprocket [B]
Rear Balancer Sprocket [C]
Balancer Chain [D]
•
Remove the collars [A] of the balancer sprockets.
CRANKSHAFT/TRANSMISSION 9-23
Comments to this Manuals
Latest comments: