3-104 FUEL SYSTEM (DFI)
Throttle Body Assy
Idle Speed Inspection/Adjustment
Refer to the Idle Speed Inspection/Adjustment in the Pe-
riodic Maintenance chapter.
Throttle Body Assy Removal
Gasoline is extremely flammable and can be ex-
plosive under certain conditions, creating the
potential for serious burns. Make sure the area is
well-ventilated and free from any source of flame
or sparks; this includes any appliance with a pilot
light. Do not smoke. Turn the ignition switch OFF.
Be prepared for fuel spillage; any spilled fuel must
be completely wiped up immediately.
Never drop the throttle body assy, especially on a
hard surface. Such a shock to the body assy can
Fuel Tank (see Fuel Tank Removal)
Right Air Cleaner Housing (see Right Air Cleaner Hous-
Cable Holder Screw [A] and Cable Holder [B]
Right Handlebar Switch Housing Screw [C]
Cap Screws [A]
Right Handlebar Switch Housing [C]
Remove the throttle cable ends [A].