Turn the ignition switch ON.
The service code [A] is displayed by the number of two
When pushing the "S" button [B] of the right handlebar
switch housing for more than two seconds while the "Er-
ror" segments [C], service code and FI warning symbol
[D] are displayed on the LCD, the display on the LCD is
switched to the normal display. But, the warning indicator
light (LED) [E] goes on or blinks and the FI warning sym-
bol is displayed.
After switching to the normal display, the service code can
be displayed again by the following procedures.
Push the "S" button of the right handlebar switch housing
for more than two seconds to display the clock setting
mode [A] on the LCD.
Push the "S" button to display the service code [B].
The display change to the clock setting mode, average
fuel consumption unit setting mode [C], service code
display each time the "S" button is pressed.
Any of the following procedures ends self-diagnosis.
Push the "S" button for more than two seconds.
When the ignition switch is turned OFF.
FUEL SYSTEM (DFI) 3-35