Operating The Cleaner; Installing The Vacuum Cleaning Robot; Installation Order; Turning The Power Switch On Or Off - Samsung SR8730 User Manual

operating the cleaner

INSTALLING THE VACUUM CLEANING ROBOT

Installation order

1.

Turning the Power Switch on or off

To use the vacuum cleaning robot, you must turn on the Power Switch
at the bottom of the main unit.
2.

Installing the Charger

To charge the vacuum cleaning robot, you must fi rst install the charger.
Since the battery is discharged when the product is purchased, you
must fully charge the battery before use.
3. Charging the Battery
You should charge the battery completely before using the vacuum
cleaning robot.
Turning the Power Switch on or off
To use the vacuum cleaning robot, you must turn the Power Switch
on.
If you turn the Power switch off, all settings will be reset.
1. Turn over the main unit and turn the Power Switch on.
- If the icons are not turned on, it indicates that the battery charge
is depleted. In this case, dock the Vacuum cleaning Robot to the
charger station after turning the Power Switch on.
- Note that turning the Power Switch off will reset all settings.
- When no key is pressed for approximately 10 minutes when the
power is on, the power is automatically turned off to save battery
power. In this case, to use this Vacuum cleaning Robot again,
please push the "Power" button or
If the Power Switch is turned off, the Vacuum cleaning Robot will not be charged even if it is
docked with the charger station.
CAUTION
20_ operating the cleaner
button.