Changing The Aspect Ratio; Adjusting Image Position; Cleaning Or Replacing The Air Filter; Correcting Image Shape - Epson PowerLite 260d Quick Reference

Changing the Aspect Ratio

If you're projecting a widescreen image,
press the Aspect button to change the
aspect ratio to 16:9. Press it again to
return to 4:3 aspect ratio.

Adjusting Image Position

If the projector is mounted to the
ceiling, adjust its position using the
ceiling mount.
If the projector is on a table, press the
blue foot release lever and lift the front
of the projector to extend the front
adjustable foot. Release the lever to
lock the foot in position.

Correcting Image Shape

• If your image looks like
the projector is not centered on the
screen. Move it to face the center
of the screen squarely.
• If your image looks like
you need to adjust the keystone
setting. Press the
on the projector to correct the
shape of the image (it will be
slightly smaller).
or ,
or ,
or buttons
Cleaning or Replacing the
Air Filter
The projector's menu system will
remind you to clean the filter at a set
interval. You need to clean the air
filter and the air vents because clogs
can block ventilation and cause
overheating.
If the filter and vents are clogged, or
it's time to replace the air filter, the
projector displays a message.
To clean the air filter, follow these
steps:
1. Turn the projector over, release
the air filter cover, and remove the
air filter.
2. Knock the dust out of the front of
the air filter.
3. Use a small vacuum designed for
computers to clean dust from the
filter and the projector vents.
4. Place the air filter back in the
projector.
5. Reset the air filter timer; see the
User's Guide for instructions.