Transmitting a Talk Confirmation Tone
You can set your radio to transmit an unique tone when you finish transmitting.
It's like saying Roger or Over to let others know you are finished talking.
• To turn talk confirmation on, press and hold
• To turn talk confirmation off, turn your radio off and then back on while pressing
To transmit to a radio that has QT noise filtering turned on:
1. Select the same channel and Interference Eliminator Code as the other radio.
filter on the receiving radio.
and speak normally.
Note: If you skip step 2, the beginning of your message may not be heard on the
For a 30-second period, starting after the last transmission, all transmissions
received on the selected channel and code will pass through the QT noise
after transmitting, your call tone transmits and
to send a call tone. This allows your voice to pass through the QT noise
while you turn the radio on. When