Motorola RDU2080d User Manual page 96

Programmable Via
RADIO PANEL
Features
Display
Keypad Beep (
or Keypad Yes
Tone) (2)
Keypad Lock
Yes
(2)
LEDs Enabled/
No
Disabled
Low Battery
Alert - N/A
Shutdown
Maximum
Yes
Channels (2)
Microphone
Gain Level, Yes
ACCESSORY
94
Programmable via
CPS
Non- Non-
Display
Display Display
Yes Yes Yes
N/A Yes N/A
No Yes Yes
N/A N/A N/A
No Yes Yes
No Yes Yes
Default Value
Press SB2 while turning ON radio to enable/disable
ON
keypad beep.
Press and hold MENU for 4 seconds to lock the
UNLOCKED
radio keypad.To unlock, press MENU for 4 seconds.
Using CPS you can disable radio LEDs
Enabled
Gives a sequence of loud and high beep tones to
ON alert battery level is low. LED will blink orange
several times. This a non-programmable feature.
Front panel radio programming (only Display
models): Set radio to Programming Mode(1) to get
Model and CPS
the Maximum Channels Menu option.
programmable
dependant
Note: Default value is set to the maximum number
of channels that the radio supports.
For front panel programming enter Programming
Medium
Mode (1).
(Level 2)
Programming Tips