Wiring Diagram - Makita BTW151 Technical Information

W
iring diagram
Press FET lead wires and
the wires of end bell
complete into the bottom
of housing L.
Be careful, not to pinch
them with housing R.
Fix lead wires (red
and white) with lead
holder.
Pass lead wires connecting controller
and terminal, between the inner wall
of housing and boss for the controller
fastening screw.
Controller
BPM. preselecting
dial plate
FET
Switch
Place the tube and controller's lead wires
on controller with bending them as illustrated below.
Controller
Tube and 6 lead wires
(6 yellow and 1 blue lead wires) bent
on controller
Place the tube protecting 6 lead wires
of controller, in the center of controller,
so that the tube and controller's lead
wires are not pinched by housing R.
BPM. preselecting
dial plate
P 8 / 8