Sony HCD-FC8 Service Manual page 32

HCD-FC8/FC9
QQ
3 7 63 1515 0
2-7. Disc Check Memory
Disc Check Memory
1. SL Disc check
2. CD Disc check
3. DL Disc check
On this screen, measure the mirror time of chucked disc, and write
to the EEPROM.
2-8. Error Rate Display
Error Rate Display
UC
PI1 Err Now xx xxxx xxxxxxxx
Max xx xxxx xxxxxxxx
Avg xx xxxx
PI2 Err Now xx xxxx xxxxxxxx
Max xx xxxx xxxxxxxx
Avg xx xxxx
PO Err Now xx xxxx xxxxxxxx
TE
L 13942296513
Max xx xxxx xxxxxxxx
Avg xx xxxx
Start:ENTER
On this screen, measure and display the error rate.
UC : Incorrect value
CR : Correct value
2-9. SACD Water Mark Check
SACD Water Mark Check
PSP AMP
PSN
Start: ENTER
On this screen, measure the PSP AMP value and PSN value of SACD
www
water mark.
.
32
http://www.xiaoyu163.com
Exit: RETURN
CR Address
Exit: RETURN
Exit: RETURN
x ao
y
i
http://www.xiaoyu163.com
8
3. MECHA AGING
On the Test Mode Menu screen, selecting
the mechanism deck.
### Aging Test MENU ###
** Pls use over 40min. CD **
Operation Menu
1. Open/Close Test
1) On the Aging Test MENU screen, press the
remote commander to display the Open/Close Test screen.
2) Insert discs and press the
commander.
3) Is starts the aging.
During aging, the disc number, operating status and repeat cycle
are displayed. Aging can be aborted at any time by pressing
[RETURN]
the key. After the operation is stopped, press the
[RETURN]
key to return to the Aging Test MENU.
4. EMERGENCY HISTORY
On the Test Mode Menu screen, selecting
Q Q
3 6 7 1 3
information such as servo emergency history.
The history information from last 1 up to 10 can be scrolled with
the O key or o key. Also, specific information can be displayed
by directly entering that number with ten keys.
### EMG. History ###
Laser Hours
a. bb xx xx xx
xx xx xx xx
a. bb xx xx xx
xx xx xx xx
Select:1-9
(1.Latest EMG.)
xxxxhxxm : The laser on total hours. Data below minutes are
omitted.
a. : Error number.
bb : Error code.
xx : Not used.
• Clearing History Information
Clearing laser hours:
[DVD DISPLAY]
Press the
Then both CD and DVD data are cleared.
u163
Clearing emergency history:
[DVD TOP MENU]
Press the
.
Initializing set up data:
[DVD MENU]
Press
The data have been initialized when "EEPROM Initialize
Finished.". message is displayed. The EMG. History screen
will be restored soon.
2 9 9 4 2 8
[3]
executes the aging of
Exit: RETURN
[1]
key on the
[ENTER]
key on the remote
[4]
displays the
1 5 0 5 8 2 9 9 4
CD xxxxhxxm
DVD xxxxhxxm
xx xx xx xx
xx xx xx xx
xx xx xx xx
xx xx xx xx
Scroll:UP/DOWN
Exit: RETURN
m
[CLEAR]
and keys in this order.
co
[CLEAR]
and keys in this order.
[CLEAR]
and keys in this order.
9 9
2 8 9 9