Using The Wizard; Specifying A Name For An Inbound Event Display - Motorola CENTRACOM 6880801D90-D User Manual

Using the Wizard

Creating a new IED configuration is facilitated using the Inbound Event
Display Wizard. Users are presented with a series of screens to create an
Inbound Event Display configuration.
When moving through the screens, clicking Cancel prompts the
user to exit the current window without accepting any changes,
returning to the Admin main window. Clicking Back and Next
moves in the sequence to the previous or next window
respectively, and Finish ends and accepts the configurations made,
resulting in the Configuration Summary.

Specifying a Name for an Inbound Event Display

1. Type an Inbound Event Display Name in the text entry bar. The
length of this name cannot exceed 256 characters.
Note: If no other name is typed in the default setting for the Event
2. Clicking Next moves on to the Message Code dialog window and
Finish returns to the Configuration Summary Screen.
6880801D90-D 6880801D90-D
5-4
Display Name then default name is "Inbound Event
Display." Once all configurations are finished, this name
appears in the Window title bar of the IED and as the name
of the show/hide button in the Design Toolbar dialog.
If the name entry box is left blank a warning dialog appears
asking to name the Inbound Event Display before
proceeding, and if the name is too long a warning dialog
appears asking to shorten the name.
Gold Series™ Elite Inbound Event Display