Door Tension Adjustment; Final Check List - Bosch SHU 6800 Installation Instructions Manual
Hide thumbs
Also See for SHU 6800:
- Use and care manual (32 pages) ,
- Installation instructions manual (19 pages) ,
- Use & care manual (16 pages)
Table of Contents
Advertisement
(586 mm'
1/4" max.
(6mm)
Figure 20.
Door Tension
Adjustment
After installation
of the dishwasher
open and close the
door several times. The door should open and close
easily with very little force required
to lift the door
when fully open. If the door closes too quickly,
or if the
door falls open, the spring tension should be adjusted.
To adjust the spring tension obtain the screw in Figure
21 out of the parts bag. Insert the screw as shown in
Figure 21 and adjust spring tension as shown.
lTorxT20 ].
Figure 21.
10
SHU 9900 Handle Assembly
The SHU 9900 model has a handle that needs to be
assembled
onto the door panel. Reference
installation
kit
and instructions
provided
with the handle.
Final check list
CHECK
ELECTRICAL
REQUIREMENTS.
BE SURE YOU HAVE CORRECT
ELECTRICAL
SUPPLY AND RECOMMENDED
GROUNDING
METHOD.
Turn on the hot water shut-off
valve and electrical
supply. Water temperature
should be 140°F (60°C).
Operate
the dishwasher
through one cycle and check for
plumbing
leaks.
If the dishwasher
does not operate refer to the SELF-
HELP
and the SERVICE
and REPAIR
sections in the
Use and Care Manual.
LEAVE
INSTALLATION
INSTRUCTIONS
AND
USE & CARE
MANUAL
WITH
OWNER.
Hide quick links:
Advertisement
Table of Contents
