Figure 2-13 Bt100 Options And Accessories - Motorola BT100 Installation And Operation Manual

2-14 Overview
Model Description
MEQ-100-* Cable equalizer
JXP-RPC Return Path Correction
Board
Figure 2-13 illustrates the location of options and accessories in the BT100.
Figure 2-13
BT100 Options and Accessories
If you are not using an ADU, QADU, or TDU, you can select manual control of the Bode board.
Figure 2-13 illustrates the location of the
BT100 Installation and Operation Manual
Function
This unit is selected to provide the desired station slope. It is
used in conjunction with the BDR board to provide additional
tilt in the interstage section of the amplifier.
This optional board provides additional flatness response
correction in the return path for systems that must meet
especially stringent return-path flatness requirements.
/ jumper on the main circuit board.
AUTO MAN