Symbol DS6707 Product Reference Manual page 29

Digital imager scanner
Hide thumbs Also See for SYMBOL DS6707:
Table of Contents

Advertisement

When the digital imager scanner senses movement, in its default Auto Aim trigger mode, it projects a red laser
3.
aiming pattern
(Figure
the default Auto Aim trigger mode, see
turns on its red LEDs to illuminate the target bar code.
The DS6707-DP version uses a donut-shaped pattern with a center aiming dot.
Standard Pattern
DS6707-DP Pattern
Laser Aiming Pattern
Figure 2-3
Center the symbol in any orientation within the aiming pattern. Be sure the entire symbol is within the
4.
rectangular area formed by the brackets in the pattern.
When scanning with the DS6707-DP, ensure part of the bar code is visible on the inside of the donut-shaped
pattern.
1D bar code
Linear bar code
Symbol
Aiming Pattern
Placing Symbol in Aiming Pattern
Figure 2-4
Hold the trigger until the digital imager scanner beeps, indicating the bar code is successfully decoded. For
5.
more information on beeper and LED definitions, see
This process usually occurs instantaneously. Steps 2 - 4 are repeated on poor quality or difficult bar codes, until the
bar code is decoded, the trigger is released, or the Decode Session Timeout is reached.
2-3) which allows positioning the bar code or object within the field of view. (To turn off
Trigger Mode on page
2D bar code
PDF417 symbol
4-8.) If necessary, the digital imager scanner
Data Matrix bar code
DS6707-DP Pattern
Table 2-1
and
Table
2-2.
Scanning
2 - 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents