Codabar (Nw - 7); Enable/Disable Codabar; Set Lengths For Codabar - Symbol DS6707 Product Reference Manual

10 - 48 Symbol DS6707 Digital Imager Scanner Product Reference Guide

Codabar (NW - 7)

Enable/Disable Codabar

Parameter # 07h
To enable or disable Codabar, scan the appropriate bar code below.
Enable Codabar

Set Lengths for Codabar

Parameter # L1 = 18h, L2 = 19h
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s)
the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within a specific
range.
•
One Discrete Length - Select this option to decode only Codabar symbols containing a selected length.
Select the length using the numeric bar codes in
only Codabar symbols with 14 characters, scan Codabar - One Discrete Length, then scan 1 followed by 4.
To correct an error or to change the selection, scan
•
Two Discrete Lengths - Select this option to decode only Codabar symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
example, to decode only Codabar symbols containing either 2 or 14 characters, select Codabar - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection, scan
Cancel on page
•
Length Within Range - Select this option to decode a Codabar symbol with a specific length range.
Select lengths using numeric bar codes in
Codabar symbols containing between 4 and 12 characters, first scan Codabar - Length Within Range.
Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading zero). To correct an
error or change the selection, scan
•
Any Length - Scan this option to decode Codabar symbols containing any number of characters within the
digital imager scanner's capability.
(01h)
D-2.
Cancel on page
*
Disable Codabar
Appendix D, Numeric Bar
Cancel on page D-2.
Appendix D, Numeric Bar
Appendix D, Numeric Bar Codes.
D-2.
(00h)
Codes. For example, to decode
Codes. For
For example, to decode