Motorola SABER RVN4002K User Manual page 84

Radio service software
Table of Contents

Advertisement

H400 - Secure Voice Slaved to a Mode
If a channel is strapped coded, the radio will transmit in accordance to its strapping. An invalid
switch position tone will sound if the ERGO switch is placed in the Clear
position.
This option is incompatible with option H244 - Delete Clear Coded Transmit Switch.
H401 - Clear Voice Slaved to a Mode
If a channel is strapped clear, the radio will transmit in accordance to its strapping. An invalid
switch position tone will sound if the ERGO switch is placed in the coded position, unless option
H244 is selected, then the ERGO switch position is disregarded.
H432 - VP Capable Only
VP (Voice Privacy) Capable Only option should be used only if the radio is capable of having
DVP modulation, but is not equipped with the encryption module. The radio will transmit if the
clear/coded switch is in the clear position only. In the coded position the radio will emit a
continuous fail alarm, until the switch is moved back to the clear position or an alarm of higher
priority (i.e. channel unprogrammed) is requested. If option H244 is selected, then the switch
position is disregarded, the radio acts as if it is clear always. If option H432 is selected, a short
beep will be heard upon power up.
H852 - 6D Master Option
Selecting this option allows you access to 6D options -- Quik Call, Single Tones (via PTT or
RATs or both), Multiple Repeater Access Codes, and Zero Audio Enable. The standard SABER
radios are equipped with the 5D version of the microcomputer. The 6D is an enhanced version
of the 5D microcomputer. The option H852 acts as a main gate to all the 6D options :
Zero Audio Enable
Quik Call II
H701
-
Individual Call
H702
-
4 Tone Group Call
H703
-
Long Tone B Group Call
H167
-
Timed Auto Reset
H188
-
Carrier Override Auto Reset
Singletones - General (PTT/RATs)
H707
-
1 Tone Singletone Via PTT Button
H742
-
Up to 2 Tone Singletone via RAT Buttons
Singletone Non-Std. Pretime
Singletone Time Duration
Multiple Repeater Access Codes - MDC 600
Multiple Repeater Access Codes - MDC 1200
Mid-Band radios have this option automatically selected.
The following options are enabled if you select H852 :
Zero Audio Enable
Quik Call II
Singletones - General (PTT/RATs)
H707
-
1 Tone Singletone Via PTT Button
H742
-
Up to 2 Tone Singletone via RAT Buttons
Multiple Repeater Access Codes - MDC 600
Multiple Repeater Access Codes - MDC 1200
78
Appendix - 5. Options List and Definitions

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sabert

Table of Contents