16-72 ELECTRICAL SYSTEM
Meter, Gauge, Indicator Unit
Disconnect the terminal .
Check that the tachometer needle [A] back to the mini-
mum (0) position.
If the meter unit does not work, replace the meter assem-
If the oscillator is not available, the tachometer can be
checked as follows.
Connect the 12 V battery and terminals in the same man-
ner as specified in the "Liquid Crystal Display (LCD) Seg-
Using an auxiliary lead, quickly open and connect the ter-
minal  to the terminal  repeatedly.
Then the tachometer segment [A] should flick [B].
If the hand does not flick, replace the meter assembly.
Check 12: Stop Watch Check
Connect the leads in the same circuit as Check 1.
Press the mode button [A] each time to set the stop watch
Connect the auxiliary lead to the terminal  as shown,
then stop watch start to count.
Disconnect the terminal  and reconnect it.
Stop Watch stop to count.