Configuration Menus - Philips iPlayer 3 Instruction Manual

Configuration Menus

You can change the following options via Configuration mode:
Triggers Menu
09:23:03 15-DEC-09
Config mode
Trigger number? <
1
Triggers enable you to assign shows to the Preset buttons on the iPlayer 3,
the keypad buttons on the Controller Keypad, or the contact switches connected
to an AuxBox. Triggers also specify playback behaviors such as repeat or jump to
another show.
Alarms Menu
09:23:22 15-DEC-09
Config mode
Alarm days? <
Specific month/day
Alarms enable you to automate show playback by specific time, date, day of the week
or astronomical event.
Setup Menu
09:23:39 15-DEC-09
Config mode
Setup menu <
Set date & time
The setup menu provides access to port configuration, clock setup, LCD setup,
and more.
Info Menu
09:23:52 15-DEC-09
Config mode
memory usage <
232k/246760k
The info menu displays the device firmware version, memory usage, and more.
At any time during playback, press
Main Menu. From the Main Menu, press
and to access a submenu. To save your changes, continue pressing
the Save Changes menu item, then press
to cancel the menu action and return to playback mode.
Example: Changing the Pre-configured Show Assigned to Preset Button 2
1. Launch Configuration mode, access the Triggers submenu, and then select menu
option 2.
2. Access the Show Type submenu, then select Canned Effect to open the pre-
configured show types.
3. Access the Effect Type submenu, then pick Cross Fade, which produces a smooth
transition from one solid color to another.
4. Navigate through the effect-specific submenus, specifying properties for start
color, end color, hold time duration, fade time duration, and offset (angle).
5. At the Test Effect submenu, preview your show, then press
6. Select show Transition type Snap (no transition).
7. Press to save your changes.
10
iPlayer 3 Product Guide
to launch Configuration mode and open the
and to scroll through menu options
a final time to save. Press
to continue.
until you reach
at any time