[Serial Remote] Menu - Sony BVM-X300 Operating Instructions Manual
Hide thumbs
Also See for BVM-X300:
- Operating instructions manual (32 pages) ,
- Operating instructions manual (42 pages)
Table of Contents
Advertisement
Submenu
Setting
[SDI Audio Setting]
Sets the audio channel when SDI signal
is input.
[Left Audio]: Select from channels
[CH1] to [CH16].
[Right Audio]: Select from channels
[CH1] to [CH16].
When a channel from [CH1] to [CH8]
is selected in [Left Audio], you can
select a channel from [CH1] to [CH8]
in [Right Audio]. When a channel from
[CH9] to [CH16] is selected in [Left
Audio], you can select a channel from
[CH9] to [CH16] in [Right Audio].
[Internal Signal Setting]
Submenu
Setting
[Internal Signal]
Select the internal signal display.
[On]
[Off]
[Pattern]
Select the pattern of the internal signal.
[PLUGE]
[Gray]
[White]
[5 Step]
[Ramp]
[Color Bars]
[Gamut Marker Setting]
Submenu
Setting
[Gamut Marker]
Turns the gamut marker [On]/[Off].
The zebra pattern can be displayed for
the signal outside of the specified color
space while [ITU-R BT.2020] is selected
for [Color Space].
[On]: Displays the gamut marker.
[Off]: Disables the gamut marker
function.
Submenu
Setting
[Target]
Sets the targeted color space.
The zebra pattern can be displayed for
the signal outside of the selected color
space.
[ITU-R BT.709]
[DCI-P3]
Notes
The setting is available while [ITU-R
BT.2020] is selected for [Color
Space].
The setting does not depend on the
status of picture control functions
such as contrast, chroma or white
balance.
When the input signal which is
included the noise composition is
over the targeted color space, the
zebra pattern display may emphasize
the noise.
[Serial Remote] menu
Submenu
Setting
[Monitor]
Sets the monitor setting.
[Network Setting]
[Monitor ID]: Sets the ID of the
monitor.
[Group ID]: Sets the group ID of the
monitor.
[IP Address]: Sets the IP address.
[Subnet Mask]: Sets the subnet mask.
([255.255.255.000])
[Default Gateway]: Sets the default
gateway [On] or [Off].
[Address]: Sets the default gateway.
[Cancel]: Selects to cancel the setting.
[Confirm]: Selects to save the setting.
[Connection]
Sets the connection of the monitor and
the controller.
[Peer to Peer]: for one to one
connection
[LAN]: for connection via a network
[Controller]
Sets the controller setting.
[Network Setting]
[IP Address]: Sets the IP address.
[Subnet Mask]: Sets the subnet mask.
([255.255.255.000])
[Default Gateway]: Sets the default
gateway [On] or [Off].
[Address]: Sets the default gateway.
[Cancel]: Selects to cancel the setting.
[Confirm]: Selects to save the setting.
Page 27
Hide quick links:
Advertisement
Table of Contents
