2-50 PERIODIC MAINTENANCE
Periodic Maintenance Procedures
Drain the fork oil [A] from the cylinder unit [B] by pumping
the piston rod several times.
Plug the two oil holes on the subtank [C] with fingers.
Hold the front fork inverted position for more than 20 min-
utes to allow the fork oil to fully drain.
Clean the threads [A] of subtank and base valve assem-
Replace the O-rings [A] on the base valve assembly with
Apply specified fork oil to the O-rings and bushings [B] on
the base valve assembly.
With the piston rod in fully compressed position, pour the
specified amount of fork oil [A].
Plug the two oil holes on the subtank [B] with fingers
until the base valve assembly is installed.
KHL15-10 (KAYABA 01) or
191 ml (6.46 US oz.)