Drive Chain Slack Inspection
Refer to the Drive Chain Slack Inspection in the Periodic
Drive Chain Slack Adjustment
Refer to the Drive Chain Slack Adjustment in the Periodic
Wheel Alignment Inspection
Check that the rear end [A] of the left chain adjuster aligns
with the same swing arm mark [B] as the right chain ad-
Misalignment of the wheel will result in abnormal
wear, and may result in an unsafe riding condition.
Wheel Alignment Adjustment
This procedure is the same as Drive Chain Slack Adjust-
ment (see Drive Chain Slack Adjustment in the Periodic
Drive Chain Wear Inspection
Refer to the Drive Chain Wear Inspection in the Periodic
Drive Chain Lubrication
Refer to the Drive Chain Lubrication in the Periodic Main-
Drive Chain Removal
Remove the engine sprocket cover (see Engine Sprocket
Remove the clip [A] from the master link using pliers, and
free the drive chain from the rear sprocket.
Remove the drive chain from the chassis.
Drive Chain Installation
Fit the drive chain back onto the sprockets with the ends
at the rear sprocket.
Install the master link [A] from the frame side.
Install the link plate [B] so that the mark faces out.
FINAL DRIVE 11-5