Squeeze the front brake lever, and hold it with a band [A]
to prevent the motorcycle from running forward.
Be sure to hold the front brake when removing the
rear wheel, or the motorcycle may fall over. It could
cause an accident and injury.
Rear Axle Nut [A]
Pull out the rear axle [A] from the left, and remove the
adjuster [B] from the swingarm.
Disengage the drive chain from the sprocket while lifting
up the rear wheel.
Pull out the rear axle and drop the rear wheel.
Insert a wood wedge between the brake pads. This pre-
vents them from being moved out of their proper position,
should the brake pedal be squeezed accidentally.
Rear Wheel Installation
Fit the brake holder stopper [A] with the stop groove [B]
against the swingarm stopper space [C] with the stopper