Idle Gear Installation
Make sure to position the circlip [A] in original position.
Replace it, if removed.
Apply molybdenum disulfide oil to the inside [B] of the idle
Replace the circlip [A] with a new one.
Install the idle gear [C] facing embossed letter [B] to the
Install the circlip.
Right Engine Cover (see Right Engine Cover Removal
in the Clutch chapter)
Clutch Housing (see Clutch Removal in the Clutch chap-
Pull the end [A] of the kick spring [B] out of the hole in the
Turn the kickshaft counterclockwise [C] and pull out the
kickstarter assembly [D].
Remove the bolt [A], and take off the ratchet guide [B].
Apply molybdenum disulfide grease to the end [A] of the