Apply a non-parmanent locking agent to the piston oil noz-
zle bolt [A].
Torque - Piston Oil Nozzle Bolt: 7.0 N·m (0.71 kgf·m, 62
Crankshaft (see Crankshaft Installation)
Oil Screen (Feed) (see Oil Screen (Feed) Installation in
the Engine Lubrication System chapter)
Apply engine oil to the transmission gears, bearings, shift
forks, shift drum and crankshaft bearing.
Install the drive shaft [A] and output shaft [B] in the right
crankcase half as a set.
Install the shift drum and shift forks (see Transmission
Replace the O-ring [A] with a new one, and apply grease.
Dowel Pins [B]
Apply liquid gasket to the mating surface [A] of the left
Sealant - Kawasaki Bond (Liquid Gasket - Gray): 92104
Make the application finish within 30 minutes when the
liquid gasket to the mating surface of the left crankcase
half is applied.
Moreover fit the case and tighten the case bolts just
after finishing the application of the liquid gasket.