Oil Pump (Scavenge) Removal
Engine Oil (see Engine Oil Change in the Periodic Main-
Flywheel (see Flywheel Removal in the Electrical Sys-
Oil Pump Cover Bolts [A]
Lower Camshaft Chain Guide [B]
Oil Pump Cover [C]
Pull out the oil pump shaft [A] to remove the inner rotor
Outer Rotor [C]
Oil Pump (Scavenge) Installation
Install the oil screen (see Oil Screen (Scavenge) Installa-
Assemble the following parts as shown.
Oil Pump Shaft [A]
Inner Rotor [C]
Fit the pin into the groove on the inner rotor.
Install the dowel pins [A] to the crankcase.
Apply engine oil to the each oil pump rotor and sliding
surface of the oil pump shaft.
Outer Rotor [B]
Inner Rotor Assy [C]
While turn the oil pump shaft, install the oil pump so
that the left and right oil pump shaft may mesh in the
ENGINE LUBRICATION SYSTEM 7-13