5-22 ENGINE TOP END
Remove the cylinder head bolts (M6) [A] and loosen the
cylinder bolt [B] for prevent damage.
Remove the cylinder head bolts (M10) following the loos-
ening sequence as shown.
Remove the cylinder head [A].
When do not remove the cylinder head easily, tap lightly
up with a plastic mallet [B] to separate the cylinder head
from the cylinder.
Face the combustion chamber [A] to the left, remove the
Remove the cylinder head gasket [B].
Cylinder Head Installation
Fit the projection [A] of the front camshaft chain guide in
the groove [B] of the cylinder.
Insert the guide end [C] into the recess [D] of the