Fuel Injector (Service Code 41)
Fuel Injector Installation
Replace the O-ring [A] and dust seal [B] with a new one.
Assemble the delivery pipe [A] and the fuel injector [B].
Fit the projections [A] on the delivery pipe to the hollows
[B] of the throttle body assy.
Tighten the delivery pipe mounting screw [A]
Connect the fuel injector connector.
Insert the fuel hose joint [A] straight into the delivery pipe.
Push the joint lock [B].
Push and pull [C] the fuel hose joint back and forth more
than two times and make sure it is locked and does not
Slide the joint, and confirm the joint is correctly in-
stalled. There is a possibility that the fuel leaks
when the installation is mistaken.
If it comes off, reinstall the hose joint.
Rear Frame (see Rear Frame Installation in the Frame
Fuel Tank (see Fuel Tank Installation)
FUEL SYSTEM (DFI) 3-61