Download  Print this page

Motorola BRAVO PLUS User Manual

Motorola pager user's guide bravo plus
Hide thumbs
   

Advertisement

A
BRAVO PLUS
User's Guide
On/Off Switch – This three-position slide switch is used to
turn the pager on and off, acts as a master reset button,
and activates the backlight.
Alert Lamp – Flashes to give a visual indication when a
message is received.
TURNING THE PAGER ON
SILENT Mode: Slide the On/Off Switch in an upward direc-
$
tion to the SILENT symbol (
). The pager vibrates (if
equipped) and the lamp flashes for 4 seconds.
ON Mode: Slide the On/Off Switch in an upward direction
#
to the ON symbol (
). The pager emits an interrupted beep
and the lamp flashes for 4 seconds.
A full-segment display accompanies the power-up alert.
888888888888
The display then changes to the standby screen.
8:59a
Standby Screen in SILENT Mode
D
8:59a
Standby Screen in ON Mode
INTRODUCTION
Congratulations on your purchase of a Motorola BRAVO
PLUS numeric display pager. This compact pager has
been designed with simple-to-use operating buttons, rug-
ged housing, and an easy-to-read display.
The BRAVO PLUS pager fits easily in your pocket or
purse, or can be worn on your belt.
The BRAVO PLUS pager offers a number of features. We
encourage you to read this instruction manual carefully to
obtain the full benefits from your BRAVO PLUS pager.
CONTROLS
Read Button (
vate pager functions. Also used to scroll through the hours
and minutes for time setting.
Menu Button (
menus and set the time of day.
2
SETTING THE TIME
• To set the time, press
• The hours digits (represented by the grey characters in
• The first digit of the minutes (represented by the grey
• All portions of the time of day screen, except the colon
3
4
Alert
Menu (
R
Read (
)
Lamp
Button
Button
BRAVO PLUS
R
) – Used to read messages and to acti-
F
) – Used to scroll through the pager
F
seTr Trime
until
R
then press
.
the sample shown below) begin to blink.
12:00a
R
Set the hours digits by pressing
is displayed along with the appropriate
R
(for P .M.) symbol. Keep pressing
hours from A.M. to P.M. When the correct hour (A.M. or
F
P.M) is displayed, press
to adv ance to the minutes
digits.
R
character) begins to blink. Press
F
digit of the minutes. Press
to advance to the second
R
digit of the minutes. Press
to change the second digit
F
of the minutes. Press
one more time to leave the time
setting function.
8:00a
:
(
), stop blinking. The time of day is now set and the
pager is in the standby mode.
F
)
Switch
Side
View
On/Off
Switch
is displayed,
until the correct hour
a
p
(for A.M.) or
to cycle through the
to change the first

Advertisement

Table of Contents
loading

  Also See for Motorola BRAVO PLUS

  Related Manuals for Motorola BRAVO PLUS

  Summary of Contents for Motorola BRAVO PLUS

  • Page 1 The BRAVO PLUS pager fits easily in your pocket or purse, or can be worn on your belt. The BRAVO PLUS pager offers a number of features. We encourage you to read this instruction manual carefully to obtain the full benefits from your BRAVO PLUS pager.
  • Page 2 The battery must be replaced within a few days to avoid in- terruption of pager operation. Tone Alerting: The BRAVO PLUS pager can also respond as a basic tone-alert model. When a tone-only message is re- ceived,...
  • Page 3 CLEANING YOUR BRAVO PLUS PAGER To clean the exterior of the BRAVO PLUS pager, use a soft, non-abrasive cloth moistened in a mild soap and wa- ter solution. Use a second cloth moistened in clean water to wipe the surface clean.