Table of Contents
Advertisement
B
(2)
When the ejector is positioned against the stop the locking key of the
contact is raised, allowing the contact to be removed by pulling moder-
ately on the lead.
(3)
Neither the contact or position is damaged by removing a contact; how-
ever, the contact should be checked visually before reinstalling in con-
nector, to be certain that retaining tab "A" extends as shown (see 2-1) for
retention in connector.
Rev 3, May 2004
ATCRBS TRANSPONDER
FIGURE 2-1 Crimping Tool
(Sheet 1 of 3)
IM 006-10545-0003.dwd
KT 76C
Page 2-7
Hide quick links:
Advertisement
Table of Contents
