ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try again.
ETTING THE CLOCK
Touch CLOCK pad.
Use the number pads to enter the correct
Touch CLOCK pad again.
·This is a 12 hour clock. When the oven is first
plugged in or when power resumes after a power
interruption, the display will show ENTER CLOCK
TIME. If you prefer not to have the clock displayed,
ETTING THE OVENTIMER
Enter the time by touching the number pads.
·Time countdown can be seen on display before
clock or cooking time is returned to display.
·The maximum time can be set is 99 minutes and
·Touch TIMER and then touch RESET to cancel
TIMER during timing process.
ETTING A COOKING PROGRAM
A. One-stage Cooking
Use the number pads to set a cooking time.
You can set a cooking time from one second
to 99 minutes and 99 seconds.
Touch POWER LEVEL pad once to set 100%
power level, If you want to set a power level
other than 100% power, touch POWER
LEVEL, then use the number pads to enter
the power level.
Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
B. Two-stage Cooking
cooking at different temperatures.
SET STAGE 1:
Follow steps 1 and 2 in "One-stage Cooking". DO
NOT TOUCH START/STOP
SET STAGE 2:
Touch COOK then enter proper cooking time and
Touch SPEED DEFROST.
Enter desired defrosting time by touching
·You'd better turn food over once during defrosting
·After setting SPEED DEFROST, oven can be
programmed to automatically switch to one or
two-stage cooking. And SPEED DEFROST can
only be set as the first stage.
·For speed defrost and one stage cooking, follow
steps above. Before touching START/STOP, touch
COOK, enter time and power level. Then touch