Download Print this page

Motorola VT1000 User Manual: Advanced Configuration

Motorola user guide voice terminal vt1000 series.
Hide thumbs

Advertisement

22

Advanced Configuration

Do not change these settings unless you have the necessary expertise and the need to
do so.
Field or Button
Description
Enable DHCP/NAT
If this is enabled, the Motorola voice terminal automatically distributes
on LAN Port
an IP address to a computer connected to its PC port. It is enabled by
default.
Virtual Servers
Configures logical data ports for applications requiring multiple data
ports. Because NAT assumes that data sent through one port will
return to the same port, you may need to configure virtual servers to
run certain applications:
IP
is the IP address of the computer connected to the Motorola
voice terminal
Port sets the port to open. The ports assigned to Motorola voice
terminal voice functions are displayed. If you forward any of
these ports, you may disrupt your voice service. The ports shown
in the illustration are examples only.
Transport
sets the protocol — Disabled, TCP, IP, or UDP.

Advertisement

   Related Manuals for Motorola VT1000

   Related Content for Motorola VT1000

This manual also for:

Vt1003, Vt1005, Vt1003v, Vt1005v

Comments to this Manuals

Symbols: 0
Latest comments: