Panasonic UB-5320 Operating Instructions Manual page 30

Assembling the Electronic Board
■ If you are using the wall-mounting
kit (option):
1) Hang the scanner / printer unit on the wall-
mounting fixtures using the wing bolts A or B
(➊).
2) Screw the two wing bolts [included in the wall-
mounting kit (option)] into the lower side
wall-mounting fixtures (➋).
1
2
• The electronic board can be mounted
7
200 mm (7
by hanging it with the wing bolts B.
6 Remove the fastening belt (➊)
cushions (➋) and tapes (
3
Tape
3
Fastening
belt
Pull here to
remove the
fastening
belt.
30
Wall mounting fixture L
1
Wall
A
mounting
fixture R
B
2
/ ") higher than hang position A
8
➌
).
2
Screen unit
Pull
1
1
Fastening belt
Pull
(required for
repacking)
2
7
Insert the two supplied screen
fastening brackets into the screen
unit frame.
Screen fastening
bracket
Projection
Screen fastening
bracket
8 Open the screen film surface.
,
Screen film surface
Caution
• When opening the screen film surface, be
careful not to scratch or wrinkle it.
Roller