Register Your Handset To Another Base; Call Another Handset (Internal Call); Transferring A Call; Conference Call - Motorola D200 series User Manual

Allegro_CID.book Page 19 Tuesday, January 15, 2008 3:07 PM
If you already have 5 handsets registered to your base and you
want to register a new handset, you will first need to de-
register one of your existing handsets, see 'De-registering a
handset', page 15.
With more than one handset you can make internal calls,
transfer calls and hold conference calls.

Register your handset to another base

Follow the procedure for registering shown in the other
manufacturer's user guide.

Call another handset (internal call)

1. Press . The symbol and
you will hear the internal call dialling tone.
2. Enter the number of the handset you want to call using the
number keypad.
Answer an external call while on an internal call
During an internal call, if an external caller is trying to get
through, you will hear a series of short beeps to alert you to the
call.
If you have caller ID, the caller's information will also be
displayed.
1. To end the internal call, press
2. Press to take the external call.

Transferring a call

You can transfer an external caller from your handset to
another internal handset.
During an external call:
1. Press . The external caller is put on-hold.
2. Enter the number of the handset you want to have a
conference call with using the number keypad.
3. When the called handset answers, press
handset backs on the base to transfer the call.
If the called handset does not answer, press
the external caller.

Conference call

You can hold a 3-way conversation (conference call) between
your handset, an external caller and another internal handset
user.
During an external call:
1. Press
2. Enter the number of the handset you want to have a
are displayed and
conference call with using the number keypad. The called
handset will ring.
3. When the called handset answers, press
initiating handset to start your conference call.
4. Any handset can press
conference call.

13. Simple solutions

The most common problems often have the simplest
.
solutions. We hope that you will not experience any problems
with your product, but in the event that you do, this section
hopes to overcome any problems quickly and with minimum
effort.
Firstly, check that:
• the telephone line cord is correctly connected.
• the mains power cord is correctly connected and switched
on.
• the batteries is charged and not in need of replacing.
. The external caller is put on-hold.
at any time to leave the
or place the
to return to
on the
19