Fan Only Mode - Carrier Crystal Plus 53KHFT 12 A6716511Df758830Bc5510C21C0Aa9De

USE OF REMOTE CONTROL (Cont.)

FAN ONLY MODE

START
1. Press " Mode " button to select FAN mode
on the remote control display.
2. Press " Fan " button to select the desired
fan speed on the remote control display.
3. Press " On/Off " button to start
the air conditioner.
ON symbol
remote control display.
OPERATION indicator
on the display panel of indoor unit.
Fan mode starts immediately.
STOP
If you want to stop the air conditioner,
Press ON/OFF button again.
NOTES
• Fan mode does not control temperature.
The setting temperature is not displayed on
the remote control display.
appears on the
will illuminate
1
3
( 14 )
2