Auto Mode - Carrier Crystal Plus 53KHFT 12 A6716511Df758830Bc5510C21C0Aa9De

USE OF REMOTE CONTROL (Cont.)

AUTO MODE

START
1. Press " Mode " button to select AUTO mode
on the remote control display.
2. Press " TEMP " buttons
desired the set temperature on the remote control
display.
For Egyptian Market :
Set desired temp. between 20°C and 28°C.
For Export Markets :
Set desired temp. between 17°C and 30°C.
3. Press " On/Off " button to start
the air conditioner.
ON symbol
remote control display.
OPERATION indicator
on the display panel of indoor unit.
AUTO mode starts after approximately 3 minutes.
STOP
If you want to stop the air conditioner,
Press " On/Off " button again.
NOTES
1. For Cool Only System
When Auto mode is activated, the air conditioner changes the operation mode automatically to
cool or fan only mode and also changes fan speed to auto speed by sensing the temperature
difference between room temperature and set temperature.
2. For Heat Pump System
When Auto mode is activated, the air conditioner changes the operation mode automatically to
cool or heat or fan only mode and also changes fan speed to auto speed by sensing the
temperature difference between room temperature and set temperature.
3. In the Auto mode, you cannot switch the fan speed. It has already been automatically controlled.
4. If the Auto mode is not comfortable for you, the desired mode can be selected manually.
or
appears on the
will illuminate
to select
2
1
3
( 12 )
2