Heat Mode - Carrier Crystal Plus 53KHFT 12 A6716511Df758830Bc5510C21C0Aa9De

USE OF REMOTE CONTROL (Cont.)

HEAT MODE

START
1. Press " Mode " button to select HEAT mode
on the remote control display.
2. Press " TEMP " buttons
desired set temperature on the remote control
display.
For Egyptian Market :
Set desired temp. between 20°C and 28°C.
For Export Markets :
Set desired temp. between 17°C and 30°C.
3. Press " Fan " button to select the desired
fan speed on the remote control display.
4. Press " On/Off " button to start
the air conditioner.
ON symbol
remote control display.
OPERATION indicator
on the display panel of indoor unit.
HEAT mode starts after approximately 3 minutes.
STOP
If you want to stop the air conditioner,
Press " On/Off " button again.
NOTES
• If the room temperature is lower than
the selected temperature, the system will start HEAT mode.
• If the room temperature is equal to or higher than
the selected temperature, the system will stop HEAT mode.
• If you use AUTO fan speed with HEAT mode, the fan speed changes automatically
to low or medium or high speed based on the temperature difference between
setting temperature and room temperature.
or
appears on the
will illuminate
to select the
2
1
4
( 11 )
2
3