The user password must be entered on the [Login page] to change settings.
There is no settings that can skip this process.
Indicates settings that can be changed only while the unit is in operation.
Indicates setting that can be changes only while the unit is not in operation
Indicates setting that can operate only Main remote controller
Indicates setting that can operate only Sub remote controller
Indicates functions that are not available when the buttons are locked.
: Touch to move the cursor left.
: Touch to move the cursor right.
: Touch to input the number.
* Changes cannot be made unless the correct
password is entered.
The table below
summarizes the square
icons used in this manual.