Clock Setting - Kenwood KEN CTS32 Instruction Booklet

Using the microwave
12

Clock Setting

1
Press " CLOCK/PRE-SET " once or twice to choose 24 hours or 12 hours.
24H or 12H will be displayed.
2
Press " " or " " to adjust the hour figures, the input time should be
within 0--23(for 24H) or 1--12(for 12H).
3
Press " CLOCK/PRE-SET ", the minute figures will flash.
4
Press " " or " " to adjust the minute figures, the input time should
be within 0--59.
5
Press " CLOCK/PRE-SET " to finish clock setting. ":" will flash and the time will light.
6
If you want to reset the clock, follow the above steps. If the " CLOCK/PRE-SET "
is not confirmed within a minute the clock setting will be cancelled.
Note: 1. When turning on the power supply the clock will display 0:00.
2) During setting the clock, if you press " STOP/CLEAR " key, you will exit
the clock setting.