Before Setting Cooktop Controls - Kenmore 970-6600 Series Use & Care Manual

Before Setting Cooktop Controls

• Pan Detection
• ESEC Lockout Feature
• Error Codes
Pan detection
All four Cooking Zones provide a Pan Detection message. If a Cooking Zone is turned
ON and no pan is detected (the pan has been moved, the pan is not centered
correctly, or the pan is not made of magnetic material), the power level will flash in the
cooking zone display window (Fig. 1).
If any of the above conditions are not corrected within 3 minutes, the cooking zone
will automatically turn off.
Please note: It is recommended that you lower the power level setting before correct-
ing the pan detection message.
ESEC Lockout Feature
The ESEC feature will not operate during a Self-Clean cycle or when the Cootop Lockout
feature is active. Whenever the ESEC Lockout feature is active,
control display (Fig. 2).
Error Codes E11 thru E77 - Each pair of cooking zones may display error messages
concerning the cooktop. If an error code displays, the cooktop control has detected a
fault condition. Press stop to attempt to clear the display. You may also need to re-
power the appliance. If error recurs, record error number and call 1-800-4-MY-HOME®
for further assistance (See back cover of this manual).
will appear in the oven
11
Fig. 1
Fig. 2
Fig. 3