Installing The Modem; Connecting The Sb6121 - Motorola DOCSIS 3.0 SB6121 Installation Manual

Docsis 3.0 cable modem
Table of Contents

Advertisement

3

Connecting the SB6121

This product is for indoor use only. Do not route the Ethernet cable outside of
the building. Exposure of the cables to lightning could create a safety hazard
and damage the product.
1. Make sure the coaxial cable is connected to a cable outlet or splitter.
2. Connect the other end of the coaxial cable to the Cable connector on the modem.
Hand-tighten the connectors to avoid damaging them.
3. Plug the power cord into the Power port on the modem.
4. Plug the other end of the power cord into an electrical wall outlet.
5. Connect the Ethernet cable to the Ethernet port on your computer.
6. Connect the other end of the Ethernet cable to the Ethernet port on the modem.
Installing the Modem • Connecting the SB6121
SB6121 DOCSIS 3.0® Cable Modem • Installation Guide
Uncontrolled Document

Installing the Modem

B
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Surfboard sb6121

Table of Contents