Louver Control - Fujitsu ASYA07LGC Service Instruction

Hide thumbs Also See for ASYA07LGC:
Table of Contents

Advertisement

7. LOUVER CONTROL

1. VERTICAL LOUVER CONTROL
(Function Range)
Each time the button is pressed, the air direction range will change as follow:
Cooling / Dry mode
Heating mode
Fan mode
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry mode
Heating mode
When the temperature of the air being blown out is low at the start of heating operation or during
defrosting, the airflow direction temporarily becomes
During use of the Cooling and Dry modes, do not set the Air Flow Direction Louver in the Heating
range (
) for long period of time, since water vapor many condense near the outlet louvers and
drop of water may drip from the air conditioner. During the Cooling and Dry modes, if the Air Flow
Direction Louvers are left in the heating range for more than 30minutes, they will automatically
return to position
During Monitor operation in AUTO CHANGEOVER mode, the airflow direction automatically
becomes
, and it cannot be adjusted.
2. SWING OPERATION
When the swing signal is received from the remote controller, the vertical louver starts to swing.
(Swinging Range)
Cooling mode / Dry mode / Fan mode(
Heating mode / Fan mode(
When the indoor fan is either at S-lo or Stop mode, the swinging operation is interrrupted
and the louver stops at the memorized position.
Horizontal flow
Downward flow
.
)
(Fig 9: Air Direction Range)
to prevent cold air being blown onto the body.
)
05-08

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asya14lgcAoyr07lgcAoyr09lgcAoyr14lgcAsya09lgcAsya12lgc

Table of Contents