Download  Print this page

Troubleshooting - Motorola QIP27xx User Manual

Set-top terminals standard-definition watch and record dvr
Hide thumbs



Before calling your service provider, review this troubleshooting guide.
This information is to help you quickly solve a problem. If your problem
persists, contact your service provider.
The set-top will not
power on
The remote control
does not work
Possible Solution
The set-top may have received a software update and
may not power on while the new software is being
installed. Try again in a few minutes.
Verify that the AC power cord is connected to the set-top
and an AC outlet. Unplug the set-top from the AC outlet,
plug it back in, and then press the
If the set-top is connected to a switched outlet on
another unit, verify that that unit is powered on. Unplug
the set-top from the AC outlet, plug it back in, and then
press the
Press the
instead of the remote control. The batteries in the remote
control may be depleted.
Verify that the remote control is in "Cable" mode.
Verify that there are no obstructions between the remote
control and the set-top. Aim the remote control directly at
the set-top front panel, not the TV or VCR.
The angle between the remote control and the set-top
may be too large. Stand in front of the set-top and not
too far to either side.
Press and release operation keys one at a time, firmly
and deliberately.
Try changing channels using the buttons on the set-top
front panel.
Check the batteries in the remote control. Install new
batteries if needed.
button on the set-top front panel



  Related Manuals for Motorola QIP27xx

This manual is also suitable for:

Qip27 series