Mitsubishi Electric AE-200A Installation Manual page 9

Notes on the SD card installed on the AE-200/AE-50
● The SD card installed on the AE-200/AE-50 has been set up at the factory. Do not use other SD cards as proper functioning
cannot be guaranteed.
● The SD card installed on the AE-200/AE-50 differs from the ones sold on the market.
● The AE-200/AE-50 will not start up if the SD card does not function properly or is not installed.
● Only the SD card that has been formatted on AE-200/AE-50 can be used.
● Do not use the SD card installed on the AE-200/AE-50 for any other equipment.
● If the SD card becomes damaged, the AE-200/AE-50 energy management data will be lost.
The AE-200/AE-50 settings data can be backed up from the AE-200/AE-50's LCD or the Web browser to an external
memory, and these data can be restored to the AE-200/AE-50. (Refer to the chapter [Maintenance] in the AE-200/AE-50
Instruction Book and the chapter [Utility] in the Instruction Book (Web Browser for Initial Settings) for details.) The energy
management data can only be output in a CSV file, and these data cannot be restored to the AE-200/AE-50. (Refer to
the chapter [Maintenance] in the Instruction Book (Web Browser for System Maintenance Engineer) for details.) It is
recommended to back up these data periodically.
WT07137X02
9