Connecting Your Dch Receiver To An A/V Receiver - Audio; Connecting An A/V Receiver - Audio - Motorola DCH6200 Operation Manual

6 CONNECTING YOUR DCH RECEIVER
Connecting Your DCH Receiver to an A/V Receiver — Audio
Note: Only (1) audio connection needs to be made to an A/V Receiver.
Connecting an A/V Receiver — Audio
There are several options available for audio connections to your A/V receiver:
•
Digital audio (OPTICAL S/PDIF)
•
Digital audio (COAXIAL S/PDIF)
•
Stereo audio (AUDIO L AND R)
•
HDMI
If your A/V receiver supports it, the optical (S/PDIF), coaxial (S/PDIF), or HDMI audio
outputs may be used in place of the stereo audio outputs (AUDIO L and R). In most
cases these outputs offer a higher level of audio quality, including support for Dolby
Digital 5.1 audio.
•
Digital audio optical (S/PDIF) — Connect the optical cable to the digital audio
connector on the DCH receiver and the optical connector on the A/V
optical
receiver.
21