Testing Your Connections; Paging Your Handset - Motorola T3150 User Manual

Testing Your Connections

Before going further, please take a moment to check your base unit connection and your
handset to PC connection.

Paging Your Handset

NOTE: Handsets will not respond to a page if they are in the charger.
Press the PAGE button located on your base unit. Your handset will
beep; the base unit's LED turns red, and the paging icon appears on
your handset display. Press any key on your handset or the base unit's
PAGE button to end the page.
If your system does not respond:
1. Make sure the base unit is plugged into an electrical outlet.
2. Charge the battery — it may not have a sufficient charge for the page test.
3. Verify that you have installed Windows Live Messenger on you PC. If you receive a
"Please start phone software" message, you have not installed the software. Go to
http://get.live.com/messenger/overview
4. See the section on Registering and Deregistering Your Handset.
NOTE: The handset that is included with your system is pre-registered to the base unit at
the factory. Should your handset fail to respond to a page, or you receive a USB Not
Connected message, please follow the registration process.
10
for the files.
Paging... Paging...
Cancel Cancel