Getting Started; Power Supply Assembly (If Included) - Honeywell VOYAGER 1202G BF Quick Start Manual

Cordless single-line laser bar code scanner and ccb00-010bt-01n-bf base
Hide thumbs


Note: Refer to your user's guide for information about cleaning your

Getting Started

Turn off the computer's power before connecting the base, then
power up the computer once the base is fully connected. When the
base is connected and powered up, put the scanner in the base to
establish a link. The green LED on the base flashes to indicate the
scanner's instant charge pack is charging. The scanner must be
returned to the base when not in use. A scanner charged on the base
with the power supply for 35 seconds will result in 100 scans, with
one scan every second.

Power Supply Assembly (if included)



  Also See for Honeywell VOYAGER 1202G BF

  Related Manuals for Honeywell VOYAGER 1202G BF