Voyager™ 1202g BF Cordless Single-Line Laser Bar Code Scanner and CCB00-010BT-01N-BF base Quick Start Guide Aller à www.honeywellaidc.com pour le français. Vai a www.honeywellaidc.com per l'italiano. Gehe zu www.honeywellaidc.com für Deutsch. Ir a www.honeywellaidc.com para español. Para Português, acesse www.honeywellaidc.com.br. Перейти...
Note: Refer to your user’s guide for information about cleaning your device. Getting Started Turn off the computer’s power before connecting the base, then power up the computer once the base is fully connected. When the base is connected and powered up, put the scanner in the base to establish a link.
Base LED Sequences and Meaning Scanner Base LEDs Charge Base Red LED - Host Communication Red LED Condition Power off, USB suspend On continuously Power on, system idle Short blinks. Occurs while Receiving data transferring data to the host port. Green LED - Scanner Battery Green LED Condition...
Reading Techniques Standard Product Defaults The following bar code resets all standard product default settings. Standard Product Defaults RS485 Interface The RS485 interface defaults to port 5B. If you have an IBM POS terminal using port 9B, scan the appropriate code below to program the terminal, then power cycle the cash register.
Keyboard Country If your interface is USB Keyboard or Keyboard Wedge, your keyboard layout default is a US keyboard. To change this layout, refer to the chart below for your keyboard country. Scan the Program Keyboard Country bar code below, then scan the numeric bar code(s) for the appropriate Country Code from page 2, then scan...
Locked Link If you link a scanner to a base using the Locked Link Mode, other scanners are blocked from being linked if they are inadvertently placed into the base. If you do place a different scanner into the base, it will charge the scanner, but the scanner will not be linked. Locked Link Mode (Single Scanner) To use a different scanner, you need to unlink the original scanner by...
Page 11
® Out-of-Stand Modes/CodeGate Activation When the scanner is in the stand, bar codes are automatically read when they are in the scanner’s field of view. When the scanner is out of the stand, by default you must push the button on top of the scanner to read a bar code.
Suffix If you want a carriage return after the bar code, scan the Add CR Suffix bar code. To add a tab after the bar code, scan the Add Tab Suffix bar code. Otherwise, scan the Remove Suffix bar code to remove the suffixes.
Data Format Editor Instructions The following are abbreviated instructions for entering a data format. For complete instructions refer to your User’s Guide, available at our website, www.honeywellaidc.com. 1. Scan the Enter Data Format symbol. 2. Primary/Alternate Format: scan 0 for Primary Format 3.
For patent information, go to www.hsmpats.com. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.